Thursday, May 14, 2015

Book Illustration











I have just completed the illustration work for an award winning author Kathleen Boucher and have started the next in the series - the books about empowering tweens, teens, and young adults with positive advice. I read each chapter and then came up with a concept to reflect the core theme. These are modern digital illustrations using a tablet after first sketching and scanning. 

Wednesday, April 1, 2015

Editing - Proofreading - Writing Services

Editing - Proofread - Basic Copy Edit - Line Edit / Heavy Copy Edit - Developmental or Substantive Edit - Writing Services

Holly M. Kothe
The Espresso Editor 


Editing

I work with any genre. I have experience with novels, short fiction, non-fiction, scripts, academic writing, articles, and plays. Here is a breakdown of the different levels of editing. I can perform a single service or a combination.
Proofread: The lightest form of editing, typically completed on the proof of the finished product. I read the manuscript and note errors in grammar, punctuation, spelling, and word usage. This is the final stage of editing to ensure the manuscript is as polished as possible before publication or submission to an agency.
Basic Copy Edit: I thoroughly scour your manuscript for errors in grammar, spelling, punctuation, and syntax. I will attend to issues like subject/verb agreement and word usage (that vs. which / horde vs. hoard), clarity, flow, and style consistency (e.g., comma usage throughout). Awkward wording will be noted, and I will also flag style choices that authors may not be aware of, but are important in making your manuscript consistent with publishing standards (titles in italics vs. quotes, capitalization of titles and brand names, numerals vs. spelling out numbers, headings, Latin abbreviations, quotations, dialogue format, etc.). Minimum rewriting is suggested.
Line Edit / Heavy Copy Edit: Encompasses the same tasks as copy editing, but also consists of rewriting/recasting lines that need help. The focus will be on technical grammar and punctuation, as well as a more in-depth edit noting wordiness, repetition, awkward phrasing, convoluted sentence structure, ambiguous descriptions, and overuse of passive voice. Inconsistent plot details or facts will be flagged; are character names spelled correctly throughout? Is your secondary character blond in one chapter, but brunet in another? Line editing deals more with clarity, flow, and style, along with basic copy editing. The two are closely related.
Developmental or Substantive Edit: This is the most in-depth form of editing, and looks at the “big picture”–the overall content, structure, and style of your manuscript. I provide not only a critique of content issues, but guidance and suggestions of how to go about improving the manuscript. This type of assessment deals specifically with the art of storytelling.
Rather than focusing on the technical aspects of the written language, I offer creative suggestions to improve upon the story in any and all areas such as plot, character development, dialogue, description, exposition, point of view, timeline, style, and narrative voice. With this type of edit, I edit in-line and provide numerous margin comments for each chapter, as well as an overall report. How can the voice of a character be made to sound more authentic? How could a scene be made funnier, or more dramatic? How can the author develop a story in the most appealing way and create the biggest impact on the reader? Substantive editing addresses all of these things. A good editor takes into account the genre and style of each unique work, and avoids imposing her own voice on the story.
The Order of Editing
Typically, a developmental edit would be performed in one pass, with rewrites then made by the author, followed by a copy edit, and a final proof read.


Writing 

I am an experienced writer of both fiction and non-fiction. My writing services include, but are not limited to, articles, blog posts, fiction, ghostwriting, author bios, advertisements, social media promotions, reviews, story blurbs, and synopses.
Writing Samples
A Little Literary (a Lotta Coffee) – My writer’s blog includes writing guidance and reviews, as well as links to publications I have contributed to including Writer’s Digest, Blood Lotus Journal, Blue Cygnus International Magazine, Dark Gothic Resurrected, Writer’s Beat Quarterly, Trembles Magazine, Lost City Review, and The Write Room Literary Journal.
A Positive Outlook – Print newspaper article
Sweet Violent Femmes - Available on Amazon and in bookstores
Sex and Horror–The Classic Pair - Erzabet’s Enchantments Book Blog

Sunday, March 8, 2015

My Original Art For Sale

My original art is now for sale on EBAY including Nudes and Book Cover Artwork Low prices and auctions - posted anywhere in the world.

 http://www.ebay.co.uk/usr/shearman15

Sunday, December 14, 2014

Book Release Banner - Advertising - Press Release




What I offer: • You will receive a reliable, professional and responsive service including excellent communication.

Press Release Banners - Marketing Material for Social Media - Advertising for Blogs

You Can Add:
Book Cover - 3D Cover - Release Date - Free Days - Promotions - Available from these Retailers - Taglines - Book Blurb - Reviews - Discounts - Whatever you want!


• I will deliver the first proof of your work within 1 working day.
• Make as many alterations as you wish at no extra until you are happy with the final result.
• When you have approved the final version you will receive a file at 300dpi and your required size.

contact me about your specific requirements



Examples:

https://www.fiverr.com/shearart/create-a-book-release-banner-press-release?funnel=2014121501005043419911480




Wednesday, November 19, 2014

How to Make Wine Cork Candles



Wax Cork Candles to Light up That Romantic Dinner


Working with wax, and mixing in pigments to create encaustic art, and decorating hurricane candles, led me to think of other ways to use leftover bits of wax candle, so this is how to make cork effect candles to place in the top of an empty wine bottle.

My goal, was to keep in the realms of crafting, using things that are normally found in the home or you would make an inexpensive purchase like PVA glue, student oils, and masking or wide adhesive tape.


What you will need


Tools 


Cut the tube along its length


Tube 


Mark out the tube 3" - 75mm and cut.


cut 

Open the tube ready to write

 Lines first marked out in pen/pencil and then covered in oil paint - some thick pencils will transfer from the cardboard.
Paint over using oil based paint as this takes time to dry.
  
Use a pencil or pen to write what you want on the cork or draw a motif - Everything should be in reverse.
Mark a line on the outside so you have 4" when flat this will give an overlap and a 1 inch diameter tube. 
 Corks have lines around them, one close to the top and the other higher to allow for the bottom to be cut away to fit in the bottle top.




Glue the outside edge and overlap using the previously marked line.


edge Use adhesive tape to hold the tube in position while the glue dries.


Tape up the tube


tape Tape up the bottom of the tube – this needs to seal the tube so the strongest tape is best or you could use additional cardboard cut to shape.

Heat old wax or crumble a cheap Candle

Add a small amount of oil paint to colour. 

  

Using muffin tins or tuna tins anything metal. Put the wax in enough to fill three quarters of the tin Place on a hot plate to melt.

  

Oil paint or wax crayon is added to create the colour of the cork. Oil gets the best consistency and you only need a small amount as shown here.

  

Mix in and stair until the wax is melted. As soon as the was is liquid remove from the hot plate ready to pour.

  

Make a wick from thin rope and dip it into the wax.

  

Lay out the wick to dry this I cut into three afterwards. 

  

Alternative to a hot plate is, place the metal container with wax in it into a bowl and pour hot boiling water around it to heat it up, this may need to be done a few times.



Pour in the wax using grips or pliers


Place the tube in a plastic container and support.

As the wax is cooling but still liquid pour in the wax to the top of the tube.

You can pour a small amount in and see if it leaks if it does let it cool – reheat the wax in the metal container then pour again as now it should be sealed.


Top up the tube


As the wax hardens it will shrink so reheat the wax left in the container and pour to the top.

Insert the wick into a cut out piece of cardboard so you can center the wick.

Alternative make a hole with a tooth pick before you top them up and insert the wick.

Let cool and then you can place in the fridge to harden – optional.

Film Cartridge


I also use film cartridges (if you can find them) I still use cardboard so I can use the transfer method of the markings and writing.

The writing can be added afterwards and when you remove the coverings any imperfections can be tidied up using a knife.

The bottom of the candle will also need cutting back to fit inside the wine bottle.


 

Finished cork effect Candles 






 

 

Saturday, November 1, 2014

Encaustic on a Candle – Art on a Candle




Decorating Candles Using Encaustic Painting

 


A few years ago, I received a strange invitation to a barbeque high up in the Aitana Mountains on the Costa Blanca. The man on the other end of the telephone asked me to bring samples of my work, that was it.

When I arrived through the high security gates, a little angst with anticipation, eight people were stood around a large grill, quaffing beers.

On the grill stood pots of wax mixed with colour pigment, a table adjacent had rows of different sized candles, various pallet knives, and a box of sponges.

Turns out he wanted to know if it was possible to create art on a candle using wax and had invited local artists from different nationalities.

The best four would be invited to create (Mass produce) candles for a price.

That was the first time I had ever heard of Encaustic painting, and even though the dodgy fella turned out to be a scammer, the experience was worth it. Anything can be achieved with wax and the willingness to fail, a little at first.






What's Encaustic Painting?


Encaustic painting involves using heated beeswax, paraffin, soy, and other plant waxes to which coloured pigments are added. The liquid/paste is applied to a surface, usually wood or canvas, but other materials can be used.

Encaustic was developed by ancient Greek ship builders, adding pigments to hot wax they used to repair their ships hulls. Some of the earliest examples of encaustic art are those of paintings attached to mummies in Ancient Egypt, about 3,000 years ago.

I have been applying wax to candles, especially to hurricane candles that burn through leaving the outside intact, the effect is superb.

The technique of mixing wax and pigment for candles is simple.


Spanish Dance Candles Use a temperature controllable hot plate. Crumble a cheap plain candle into a stainless or metal shot size pot or muffin tins and add powder pigment with a teaspoon.

Knowing the characteristics of your pigments, whether they’re transparent or opaque will influence how much pigment you use. Don’t use too much pigment if there’s not sufficient wax to stick it down, the wax will flake — practice will gets the best consistency ratio.






Techniques for applying the wax


Seascape Sponge, pallet knife, an old thin paint brush, and for detailed work a bristle-less thin paint brush with a metal end.

Start sponging backgrounds like skies and seas, form boats and sailing ships, dipping a pallet knife into the hot wax, moving it along letting the wax slip off.

With practice you can judge the speed needed to apply thick or thin lines and pallet knife larger areas in. Almost drizzle the wax, at the same time spreading it. If you go over, even on a wax back ground you can trim back with a knife and repair mistakes.

Paint layer after layer to raise a surface for a motif and also paint the side of hurricane candles for more complex work as the exterior stays intact, you can place a tea light candle inside and keep reusing.

 

Safety and further practice


Sea world Apart from the obvious, breathing in the fumes, heat from the wax, and the hot plate, the other thing is to not over heat the wax and don’t dip a pallet knife, brush or anything into a colour that is loaded with a different colour.
Dipping your tools into the right colour then wipe it, will clean it.

Practice on cheap candles as you can scrap them clean for another try until you get a feel for it.
Once you have and got it down. The next step is to buy a large expensive candle.
I don’t think it’s necessary to purchase Carnauba wax or Beeswax.

Using cheap clear candles crumble and melt, add powder pigments (from any art shop) or Oil paints and add Damar resin is enough.
Damar resin is mixed with beeswax to harden it and raise its melting temperature. It also keeps the wax translucent preventing blooming (whitening). It can be polished to a glossy shine.
Wax melts at 150 degrees F– 65 degrees C.



 
 Why not try with some wax crayons and a cheap candle dip a sponge into the hot wax and dab it onto the candle use a pallet knife to make lines



Practice Candles


 
I’ve seen people take days to get it and some look like they had been doing it years, which one are you?